 |
||
|
| ||
Wood staining and polishing advisory service |
||
Advice CentreFinishing advice for...
Ask the Experts
Call us:
|
Producing a high gloss finish on tables & work surfacesEven if you have access to spray equipment, sometimes its necessary to create a hard wearing gloss finish by hand especially when working on fitted units or away from the workshop.Finney's Durapolish Clear Glaze - Gloss produces a high build traditional gloss finish. Simply brush on a coat of glaze and leave to dry. Cut back with 400 to 800 Wet ‘N’ Dry Abrasive Paper or 400 grade Lubrisil Paper between coats removing any dust with a Tack Cloth. Three to four applications will be needed to give sufficient shine and protection depending on the wood being coated. To increase the shine further, leave for a few days and apply Burnishing Cream buffing with an Extra Soft Polishing Cloth. A White non-abrasive pad will also help to increase the shine. Alternatively, for a very hard wearing modern gloss finish, use Rustin’s Plastic Coating Two Part Cold Cure Lacquer. Expert Advice, Simple Solutions, Beautiful Wood Our range of products has been developed over many years so that customers can be assured of compatibility and of achieving excellent results. The advice given here refers solely to the specific products mentioned and not to other manufacturers products which although may appear to be similar, invariably are not. |
Shop ProductsCourses
To OrderCall us:
|
