First decide whether you want a satin (original) or matt-satin (reduced shine) finish and after sanding the wood apply a single thin coat of FINPOL Easy Polish by brush or Polishing Mop.
After around 20-30 minutes, cut back lightly (denib) with 400 grit Lubrisil Paper and wipe off any dust with a Tack Cloth. Apply two coats on oak or three coats on more porous timbers denibbing between each coat. For a really silky smooth finish, you can wax the wood the following day using Finney’s Superior Finishing Wax applied using a pad of '0000' Grade Ultra Fine Steel Wool. Finally buff with a Soft Polishing Cloth.
Expert Advice, Simple Solutions, Beautiful Wood
All of the information offered in this Question and Answer format is given in good faith and no responsibility can be accepted for loss or damage however caused. Always carry out a test before proceeding and if in doubt, contact our free wood finishing Advice Line on 01246 261664 before starting.
Our range of wood finishing products has been developed over many years so that customers can be assured of compatibility and of achieving excellent results. The advice given here refers solely to the specific products mentioned and not to other manufacturers products which although may appear to be similar, invariably are not.